Group Members

Research Group Photo (May 2016)

Research Group Photo (May 2018)

GRADUATE STUDENTS

University of Tennessee-Knoxville:

  1. Amirsalar Moslehy, Ph.D. Candidate
  2. Wadi' Imseeh, Ph.D. Candidate
  3. Zaher Jarrar, Ph.D.,Candidate
  4. Siavash Amirrahmat, Ph.D. Degree, Spring 2020, dissertation: "3D Characterization of Force Transmission Structures and the Effect of Particle Scale Properties on the Force Chains in Natural Silica Sand".
  5. Wadi' Imseeh, MS Degree, Fall 2017, Thesis: "3D Experimental Quantification of Fabric and Fabric Evolution of Sheared Granular Materials Using Synchrotron Micro-Computed Tomography".
  6. Zaher Jarrar, MS degree, Spring 2018
  7. Simone Mitzger, MS degree, Summer 2018
  8. Thuy Thank Trieu, MS Degree, Summer 2017, Thesis: "Fracture Behavior of Single Mason Sand Particles Under Uniaxial Compression".
  9. Karen Lee, MS Degree, Spring 2017, Thesis: "Particle Morphology and Its Influence on Friction and Dilatancy of Sands".
  10. Maha Jarrar, MS Degree, Spring 2016, Thesis: "Kinematic Behavior of Sheared Sand With Emphasis on Particle to Particle Interaction Using Computed Tomography".
  11. Druckrey, Andrew, Ph.D. Degree, Summer 2016, dissertation: "3D Multi-Scale Behavior of Granular Materials using Experimental and Numerical Techniques".
  12. Qassem, Ala'a, MS Degree, Summer 2014
  13. Cil, Mehmet Burak, Ph.D. Degree, Spring 2014, Dissertation: "3D Kinematic and Strength Behavior of Granular Materials at the Particle-Level"

Louisiana State University:

  1. Haque, Md Nafiul, MS. Degree, Summer 2011, Thesis: "3D Quantification of Particle Interaction of Compacted Powders Using Synchrotron Micro-tomography", currently pursuing Ph.D. degree at Louisiana State University.
  2. Cil, Mehmet Burak, MS. Degree, Summer 2011, Thesis: "Discrete Element Modeling of Cone Penetration in JSC-1A Lunar Regolith Simulant", currently pursuing Ph.D. degree at University of Tennessee.
  3. Yang, Yi, MS. Degree, Spring 2011, Thesis: "Measurement of Spatial Variation of Density of Compacted Powders Using Synchrotron Micro-tomography", Manager, Adfaith Management Consulting Inc., China.
  4. Pathak, Binay, MS. Degree, Fall 2010, Thesis: "Analysis of Static Lateral Load Test of Battered Pile Group at I-10 Twin Span Bridge. Co-advisor, Geotechnical Engineer, Baton Rouge, LA.
  5. Richard Varuso, Ph.D. Degree, Spring 2010, Dissertation: "Influence of Unstable Soil Movement on Pile-Supported Concrete Floodwalls and an Improved Design Methodology", US Army Corps of Engineers, New Orleans, LA
  6. Alsidqi Hasan, Ph.D. Degree, Summer 2009, Dissertation: "Micro Characterization of Deformations in Granular Materials During Shear", Postdoctoral Scholar, University of Western Australia.
  7. Bashar Alramahi, Ph.D degree, Fall 2007, Dissertation: "Characterization of Unsaturated Soils using Elastic and Electromagnetic Waves", Senior Research Geologist, Exxon Mobil, Upstream Research Facility, Houston, TX.
  8. Zaydoun T. Abusalem, Ph.D. degree, Graduated Summer 2007, Dissertation: "Flow and Distribution of Water in Fractional Wettability Unsaturated Porous Media", Co-Advisor, Chairman, Department of Civil and Environmental Engineering, Philadelphia University, Amman, Jordan.
  9. Rohit Raj Pant, MS degree, Graduated Summer 2007, Thesis: "Evaluation of Consolidation parameters of Cohesive Soils Using PCPT Method", Geotechnical Engineer, HNTB, Co-Advisor.
  10. Dushi, Ardita, MS degree, Graduated Fall 2006, Thesis: "Refurbishment of Louisiana State University Calibration Chamber". Manager, Fugro Consultants, Dallas/ Fort Worth, Texas.
  11. Bevin N. Adams, MS Degree, Graduated Spring 2006, Project: "Influence of Particle Micro-properties on Shear strength of Sands". Geotechnical Engineer, CDM, Baton Rouge, LA.
  12. Lynne Roussel, MS Degree, Graduated Summer 2005, Thesis: "Experimental Investigation of Stick-Slip behavior in Granular Materials". Geotechnical Engineer, Terracon, Baton Rouge, LA.
  13. Sacit Akbas, MS Degree, graduated Summer 2004, Thesis: "Strain Localization in Clay: Plane Strain versus Triaxial Loading Conditions". Senior Civil Engineer, FICHTNER GmbH & Co. KG, Turkey.
  14. Mustafa Alsaleh, Ph.D Degree, graduated Summer 2004, Dissertation: "Numerical Modeling of Strain Localization in Granular Materials Using Cosserat Theory Enhanced With Microfabric Properties". Senior Research and Development Engineer, Caterpillar Inc.
  15. Heath Williams, MS Degree, graduated Summer 2004, Thesis: "Development of a True Triaxial Apparatus for Soil Testing". President, W Geotechnical & Testing Inc.
  16. Bashar Alramahi, MS Degree, graduated Summer 2004, Thesis: "Assessment of Shearing Phenomenon and Porosity of Porous Media Using Micro-focus Computed Tomography", Senior Research Geologist, Exxon Mobil, Upstream Research Facility, Houston, TX.
  17. Munir Nazzal, MS Degree, graduated Fall 2003, Thesis: "Field Evaluation of In Situ Testing Technology for QC/QA Procedures During Consolidation of Pavement Layers and Embankments", Assistant Professor, Ohio University, Athens, Ohio, USA.
  18. Brenda Novoa, MS Degree, graduated Summer 2003, Thesis: "Strength Properties of Granular Materials". Geotechnical Engineer, Puerto Rico.
  19. Ekrem Seyman, MS Degree, graduated Summer 2003, Thesis: "Laboratory Evaluation of In Situ Testing As Potential Quality Control/ Quality Assurance Tools". Manager, HSBC Bank, Turkey.

UNDERGRADUATE STUDENTS

University of Tennessee-Knoxville:

Louisiana State University: